Skip to content
OkLychee Inc.

Workshop

How a piece is made.

Every piece passes through the same few steps. These are the ones you can see in the photographs on each product page.

Wedging

Wedging

Clay is kneaded on a wooden board to push out air and even the moisture before it is weighed for the wheel.

Throwing

Throwing

The clay is centred and opened on the wheel, and the walls are pulled up in a few slow passes.

Shaping

Shaping

Necks and shoulders are gathered in while the clay is still soft. Bottle vases are thrown in one piece.

Sawing

Sawing

Boards for stools and tables are cut roughly to size first, leaving extra for the plane.

Planing

Planing

Tops and rails are flattened and squared by hand plane before any joint is cut.

Measuring

Measuring

Legs and rails are checked with calipers against the first one made, so every joint fits the same way.

Materials

Clay

Stoneware and porcelain bodies, thrown on the wheel and fired to 1280°C.

Wood

Oak, ash and walnut, finished with hard-wax oil.

Glaze

Mixed in the workshop. Ask us about the finish on your chosen piece.

A jigsaw on the workshop bench

Commissions

Something in a different size?

Most pieces can be made larger, smaller or in another wood or glaze. Write with what you have in mind and where it will live.

Ask about a commission